|
AIR-O-FIT
| 
Click
here for Details
|
|
For
Connecting
Cut the tube for required length by tube cutter and push
the tube on the core of the fitting and tighten the nut by hand.
For Disconnecting
Loose the nut and pull tube out.
No Tools Needed for Tubing Installation
No wrenches, haring tools, benders or other tools are used
for tube installation. |
Reduce
Installation Time and Labour Cost
AIR-O-FIT Fittings offer a minimum of 36% saving in installation
time, compared to regular compression type fittings.
Excellent Holding Power
The AIR-O-FIT fittings when assembled finger tight on polyethylene
or P.V.C. tubing will hold the burst pressure of the tubing itself.
Pipe Swivel Possible
By loosing nut slightly pipe can be swivel on its own by
3600 as per required direction.
Material
Elbows and Tees : Brass Forging (as per B.S.218) / Aluminium
/ Acetal copolymer (Celcon).
Connectors
: Unions / Female Studs : Stress relieved brass bar stock ( as per
B.S. 249) / Aluminium / Acetal Copolymer (Celcon)
Pipe Thread
British standard pipe threads (Parallel).
Also available MM threads on 4mm OD tube fitting
Operating Medium
Compressed air, light gases, water, lubricating oil.
Working Pressure
Vacuum to 10 Bar (depend upon bursting pressure of tube).
Working Temperature
10o C to + 45o C (For Polyethylene
tubing)
10o C to + 60o C (For Polyurethane
tubing)
10o C to + 80oC (For Nylon tubing)
Ordering Information
To order, simply specify catalogue number for configuration
and size desired.
Example
6mm tube X 1/4" B.S.P. Male connection Code No. A 2006
_______________ Brand of fittings (AIR-O-FIT)
| _____________ Thread Size
| | ____________ Type of fitting
| | | ___________Pipe Size
A2 0 06
Click
here for Details |
|
Print
this Page